We create a plan that’s right for you.

Renovation costs can be complicated, but we use a broad formula which lets us hone in on a ball park figure.

As a general rule of thumb in terms of square meter costing, a renovation in Sydney will range from $750 – 2,500 per square meter.

But depending on the size of your home, the quality of materials used and if we are adding/ removing walls, or building any extensions/ additions the cost per square meter can fall above or below this range.

Ideally speaking, a cosmetic renovations budget is around 10% of the current value of a home. So with the average Sydney property currently sitting at around $1,200,000. A full home renovation will cost around $120,000.

Whereas for a structural renovations budget, that number can range from 10% up to 40% of the current property value. So if using the same current median cost of a Sydney home, an extensive structural renovation could cost between $120,000 and $480,000.

This of course is also subject to the quality of materials used, the scope of works and the desired finish (be it a budget, midrange or high-end renovation).

Additionally, an extra 10-20% on top of the renovation cost should always be budgeted for as a contingency plan for any works that are unforeseeable before beginning demolition.

The terms remodelling and renovating are often used interchangeably, while both do refer to making improvements/ alterations to an existing house, technically speaking they refer to 2 different types of construction. The definition of renovation means “to improve or restore to a good state of repair.” While the definition of remodelling is “to change the structure or form of a building or house”.

The cost of extensions also depend on multiple factors such as location, complexity of works, quality of materials and square meterage. 

But again we have a useful formula that we use to get a ballpark figure. In terms of square meter costing for ground floor home extensions, you can expect to pay in the region of:

  • $1200 – $1600 per square meter for brick veneer.
  • $1300 – $1700 per square meter for full brick.
  • $1500 per square meter for timber frame.

If you’re adding another level to your home, you can expect to pay 50% more than a single story extension. So approximately:

  • $1800 – $2400 per square meter for brick veneer.
  • $1950 – $2550 per square meter for full brick.
  • $2250 per square meter for timber frame.

An average renovation will require 8-10 specific trades to complete. If you have the contacts, we suggest taking extra care when layering and scheduling each. Because any overlapping, or unreliability can cause a cascade effect that will potentially blow out an entire renovations timeline and budget.

This is where a reputable renovation company comes in, we ensure that all trades and suppliers are not only priced fairly, but that all timelines and milestones are respected and upheld.

The earlier the better. If you’re not experienced and/ or 100% confident in your ability to execute on your renovation. Getting a reputable company involved from the beginning stages will ensure you avoid all of the common pitfalls and save money by avoiding conflicts in things like architects, suppliers, architectural style, planning, building materials and strategy.

1. Increasing property value.
2.  Modernising outdated features.
3. Opening up more space.
4. Personalising your environment.
5. Adding energy efficiency.
6. Repairing cosmetic or structural damage.
7. Increasing appeal for prospective buyers.
8. Enhancing your indoor and outdoor living experience.

1. Extensions.
2. Adding a 2nd or 3rd level.
3. Aesthetic interior changes.
4. Bathroom, kitchen & laundry upgrades.
5. Subdivisions.
6. Enhancing lifestyle.
7. Increasing value.
8. Improving indoor and outdoor living.

The best place to start is always by contacting a reputable and trusted renovation company or builder.

At Sydney Side Renovations we always recommend our clients to seek out multiple quotes. This way our clients have a realistic feeling for what to expect when in terms of pricing, professionalism, personalisation, steps in the process, timelines and requirements.